H+S MLEH 6x12, 12x QODC2 to NOKIA Boot, 5m blunt cut on top - 10mm2 - MM - 25m (MADE TO ORDER - 8 WEEKS)

Part Code: 85120085
MLEH hybrid trunk with 6x12 breakout, Q-ODC2 to Nokia Boot fibre interfaces and integrated power conductors for combined FTTA fibre and power routing. The assembly is factory terminated and tested, with rodent-resistant construction for common RRH systems. This version provides a 5 m blunt cut top end and 10 mm2 power conductors alongside the fibre breakout.

Specifications
Part code: 85120085
Product name: H+S MLEH 6x12, 12x QODC2 to NOKIA Boot, 5m blunt cut on top - 10mm2 - MM - 25m
Application / suitability: Combined FTTA fibre and power routing
Compatibility: 12 x Q-ODC2 to Nokia Boot with 5 m blunt cut top
Cable type: Hybrid fibre and power trunk
Fibre type: Multimode
Connector or interface: 12 x Q-ODC2 to Nokia Boot with 5 m blunt cut top
Diameter / size: 5 m blunt cut top | 10 mm2 power conductors
Length: 25 m
Lead time: Made to order - 8 WEEKS
Other available lengths or variants: Other lengths in this range: 20 m, 25 m, 30 m

MASTERLINE Extreme Hybrid (MLEH)
Hybrid-riser cable with compact divider

FTTA Fiber-To-The-Antenna feeder

Hybrid Fibre Cable. Multi mode bend insensitive fibre.

HUBER+SUHNER’s hybrid cabling system is the most efficient and easiest to install product available on the market. Mobile operators on four continents verified that MASTERLINE Extreme Hybrid can be installed in half of the time of competitive hybrid solutions based on corrugated coax cable designs. The factory-terminated "plug & play" system in combination with a highly flexible and easy-to-route cable makes the HUBER+SUHNER solution the hybrid cable of choice for operators, system vendors and installers alike. The pre-terminated hybrid cable assembly minimises the quantity of cables running up the mast. The compact divider splits the optical fiber and DC power cable into individual ruggedised outdoor cables which are linked to the RRHs – either directly or via extension jumpers without the need for bulky mast mount distribution boxes. The RRH jumpers allow an adaptation to different RRH interfaces and therefore make the solution independent from the system vendor’s hardware.
 

 

Brand
  • Huber + Suhner
Cable Diameter
  • 28mm
Fibres
  • 6xDC,12 Pair Fibre (24 Fibre)
Length
  • 25m
Type
  • Multimode Fibre
YOU MAY ALSO LIKE